What dental chair faults do you repair most often?

Chair movement failures (hydraulic, motor or limit-switch faults), water or air leaks at the delivery head, foot-control faults, weak or no instrument spray, operating-light failures, scaler faults, spittoon and cup-fill problems and blocked suction at the chair. Control-board faults are usually fixed by replacing the board.

How quickly can you attend a broken dental chair in the UK?

We reply to every message within 4 hours and start with remote diagnosis, which often gets the chair working or at least identifies the part. We are based in Tirana, so on-site visits in the UK are planned with you rather than promised to a fixed response time. Contact us to agree scheduling.

How much does a dental chair repair cost?

It depends on the fault and the parts. You get an itemised quote before any work starts, and remote diagnosis often keeps the bill down by avoiding a wasted visit.

What if the chair is still under warranty?

Call the supplier you bought it from. In-warranty faults go through the supplier, who sends an authorised engineer; for Anthos and Dentsply Sirona that can be us. Most repair calls we get directly are for chairs out of warranty, and those we quote and fix ourselves. We offer no warranty of our own beyond the manufacturer's.

Dental Chair Repair

Dental Chair Repair and Dental Unit Servicing in the UK

Dental chair repair for UK practices: we find out why the chair, delivery unit, light or instrument lines have stopped working and fix them with genuine parts. Many faults can be narrowed down remotely from photos, error codes and a video call, so the right parts arrive with the engineer.

Report a Fault +355 69 654 5873

Engineer Erion Çollaku testing a dental handpiece on a treatment unit

What We Fix

Dental Unit Repair Work

Repairs on treatment centres, delivery systems and the instruments attached to them.

Authorised for Anthos and Dentsply Sirona

We are authorised and factory-trained for Anthos and Dentsply Sirona chairs and delivery units. For other makes, whether we can repair your model depends on its age, parts and service documentation; send us the make, model and serial number and we will confirm before booking, including whether the fault needs a manufacturer-only tool or software licence.

Remote Diagnosis First

Send the make, model, error code and a short video of the fault. Foot-control resets, blocked filters, tripped breakers and air leaks can often be sorted with your team over a call. When a visit is needed, we arrive knowing what to replace.

Genuine Parts

Solenoid valves, foot-control switches, instrument tubing, light drivers, chair motors and hydraulic or pneumatic parts sourced from the manufacturer or its distributor, so repairs do not compromise the CE or UKCA marking of the device.

Documented Repairs

Each repair is written up with the fault, the parts fitted and the tests carried out. That record supports warranty claims and gives your CQC inspection evidence that equipment is maintained.

How It Works

From Fault Report
to Working Chair

How a dental chair repair runs for a UK practice.

Report the Fault

Call, email or WhatsApp us with the unit make, model, serial number, error code and what the chair is doing. We reply within 4 hours.

Within 4 hours

Remote Diagnosis

Video call with your team to test functions, read error logs and narrow the fault to a component.

30–60 minutes

Written Quote

Itemised parts and labour, the likely visit date and what can be done in the meantime. Work starts when you approve it.

1 day

Repair Visit

Parts fitted to the manufacturer's service procedure. Visit dates for UK practices are arranged with you.

Scheduled with you

Test and Report

Functional test of the repaired system and the circuits around it, waterline flush, and a written repair report.

1–2 hours

Questions

Dental Chair Repair FAQs

Common questions about dental chair and dental unit repair.

Chair movement failures (hydraulic, motor or limit-switch faults), water or air leaks at the delivery head, foot-control faults, weak or no instrument spray, operating-light failures, scaler faults, spittoon and cup-fill problems and blocked suction at the chair. Control-board faults are usually fixed by replacing the board.
We reply to every message within 4 hours and start with remote diagnosis, which often gets the chair working or at least identifies the part. We are based in Tirana, so on-site visits in the UK are planned with you rather than promised to a fixed response time. Contact us to agree scheduling.
It depends on the fault and the parts. You get an itemised quote before any work starts, and remote diagnosis often keeps the bill down by avoiding a wasted visit.
Call the supplier you bought it from. In-warranty faults go through the supplier, who sends an authorised engineer; for Anthos and Dentsply Sirona that can be us. Most repair calls we get directly are for chairs out of warranty, and those we quote and fix ourselves. We offer no warranty of our own beyond the manufacturer's.